Physical Planning and Construction Civil Engineering Construction

Water Reticulation Systems Cleaning and Disinfection Training

SAQA US 254062 | NQF 2 | Credits 12 | Duration 9 Days
From $1,798 per delegate

Description

This course equips learners with the knowledge and skills required to clean and disinfect water reticulation systems effectively. It covers the principles of water reticulation, the importance of hygiene, and the procedures for ensuring safe and potable water supply. Participants will understand the regulatory requirements and best practices for maintaining water quality in reticulation networks.

Learning Outcomes

  • Demonstrate knowledge of water reticulation systems and their components.
  • Apply cleaning and disinfection procedures to water reticulation systems.
  • Analyze water quality test results to ensure compliance with health standards.
  • Implement safety measures during cleaning and disinfection operations.
  • Evaluate the effectiveness of disinfection methods and adjust as required.

Target Audience

This course is intended for water treatment plant operators, maintenance technicians, and environmental health practitioners responsible for the cleaning and disinfection of water reticulation systems in municipal, industrial, or commercial settings.

Prerequisites

None — open enrollment.

Course Outline

Day 1: Introduction to Water Reticulation Systems and Regulatory Framework

Objectives:
• Understand the purpose and components of water reticulation systems
• Identify relevant legislation, standards, and codes of practice
• Recognize the importance of cleaning and disinfection for public health
• Describe the roles and responsibilities of personnel involved
• Outline the course structure and assessment requirements

Topics:
• Overview of water reticulation systems: pipes, reservoirs, valves, hydrants
• Key legislation: SANS 241, SANS 10252, Water Services Act
• Health risks associated with contaminated water
• Principles of water quality management
• Introduction to cleaning and disinfection methods
• Safety, health, and environmental considerations

Day 2: Water Quality Parameters and Sampling

Objectives:
• Explain physical, chemical, and microbiological water quality parameters
• Describe sampling techniques and equipment
• Interpret water quality test results
• Identify common contaminants and their sources
• Apply chain of custody procedures for samples

Topics:
• Physical parameters: turbidity, colour, temperature
• Chemical parameters: pH, chlorine residual, conductivity
• Microbiological parameters: total coliforms, E. coli
• Sampling points and frequency
• Sample collection, preservation, and transport
• Record keeping and documentation

Day 3: Cleaning Methods for Water Reticulation Systems

Objectives:
• Describe different cleaning techniques: flushing, swabbing, pigging
• Select appropriate cleaning method based on system type
• Plan and prepare for a cleaning operation
• Identify hazards and implement control measures
• Evaluate cleaning effectiveness

Topics:
• Hydraulic flushing: principles and procedures
• Air scouring and water jetting
• Swabbing: foam swabs, chemical swabs
• Pigging: types of pigs, launching and receiving
• Pre-cleaning inspection and system isolation
• Wastewater management during cleaning

Day 4: Disinfection Principles and Chlorination

Objectives:
• Understand disinfection mechanisms and kinetics
• Describe chlorination: chlorine forms, dosing, and contact time
• Calculate chlorine dosage and residual requirements
• Apply safety precautions when handling chlorine
• Monitor and record disinfection parameters

Topics:
• Disinfection theory: inactivation of microorganisms
• Chlorine chemistry: free chlorine, combined chlorine
• Chlorine dosing calculations
• Breakpoint chlorination
• Chlorine residual testing: DPD method
• Safety: chlorine gas hazards, PPE, emergency procedures

Day 5: Advanced Disinfection Methods and Alternative Technologies

Objectives:
• Compare alternative disinfection methods: UV, ozone, chloramines
• Select appropriate disinfection technology for specific applications
• Describe operational requirements for UV and ozone systems
• Understand advantages and limitations of each method
• Integrate multiple barriers for water safety

Topics:
• Ultraviolet (UV) disinfection: principles, lamp types, dose
• Ozone disinfection: generation, contact, by-products
• Chloramination: formation of monochloramine
• Peracetic acid and chlorine dioxide
• Disinfection by-products and regulatory limits
• Multi-barrier approach in water treatment

Day 6: Cleaning and Disinfection Procedures for Reservoirs and Tanks

Objectives:
• Plan and execute cleaning and disinfection of storage reservoirs
• Implement confined space entry procedures
• Apply correct disinfection concentrations and contact times
• Ensure structural integrity and hygiene post-cleaning
• Document the process and verify water quality

Topics:
• Types of reservoirs: ground, elevated, service
• Cleaning sequence: drain, sediment removal, high-pressure wash
• Disinfection: chlorination of reservoir surfaces
• Confined space entry: permits, gas monitoring, rescue
• Rinsing and refilling procedures
• Post-disinfection water sampling and testing

Day 7: Pipeline Disinfection and Commissioning

Objectives:
• Describe procedures for disinfection of new and repaired pipelines
• Calculate chlorine dosage for pipeline disinfection
• Implement flushing and sampling protocols
• Verify disinfection effectiveness through bacteriological testing
• Complete commissioning documentation

Topics:
• Pre-commissioning cleaning: swabbing, flushing
• Chlorine dosing: tablet method, continuous injection
• Contact time and residual monitoring
• Flushing after disinfection
• Bacteriological sampling and criteria for acceptance
• Commissioning reports and record keeping

Day 8: Emergency Response and Troubleshooting

Objectives:
• Identify common problems in cleaning and disinfection operations
• Develop contingency plans for system failures
• Respond to water quality incidents
• Investigate causes of contamination events
• Implement corrective actions and preventive measures

Topics:
• Common issues: low chlorine residual, turbidity spikes, biofilm
• Troubleshooting chlorination equipment
• Emergency disinfection procedures
• Boil water notices and public communication
• Incident investigation and root cause analysis
• Preventive maintenance planning

Day 9: Quality Assurance, Documentation, and Course Review

Objectives:
• Understand quality assurance frameworks for cleaning and disinfection
• Complete and maintain accurate records
• Review and integrate all course content
• Prepare for assessment and certification
• Apply knowledge to real-world scenarios

Topics:
• Quality assurance plans and audits
• Standard operating procedures (SOPs)
• Record keeping: logs, checklists, reports
• Regulatory compliance and certification
• Case studies and group discussions
• Course assessment and feedback

Practicals

32 hours of practicals To be conducted online or on-campus or in-house
Overview

Hands-on practical sessions allow learners to apply cleaning and disinfection techniques in a controlled environment, reinforcing theoretical knowledge. Learners will practice sampling, chlorine dosing, pipeline flushing, and reservoir cleaning under supervision.

Practical Activities
  • Water Sampling and Quality Testing — Learners collect water samples from various points, perform physical and chemical tests (turbidity, pH, chlorine residual), and interpret results. (8h)
  • Pipeline Cleaning and Flushing — Learners set up and execute hydraulic flushing and swabbing on a test pipeline, including isolation, waste management, and effectiveness assessment. (8h)
  • Chlorination and Disinfection Dosing — Learners calculate chlorine dosage, prepare chlorine solutions, and dose a reservoir or pipeline, monitoring residual over contact time. (8h)
  • Reservoir Cleaning and Disinfection — Learners simulate cleaning and disinfection of a storage tank, including confined space entry procedures (dry run), surface disinfection, and post-cleaning sampling. (8h)

Summatives

Each delegate is assessed continuously throughout the course via daily exercises, scored practical assignments, and a final summative test at the end.

Practical Assignments — 30%

Practical assignments are observed and scored against a rubric during the practical sessions. Each delegate's practical mark is averaged into a single 100% score and contributes 30% to the final total.

Daily Exercises — 20%

Every training day ends with a multiple-choice exercise scored out of 100%. The scores from each daily exercise are averaged across the duration of the course to produce a Daily Average mark, which contributes 20% to the final total.

Final Test — 50%

On the last day a final summative test is written. It is a multiple-choice paper with multiple-answer questions: each question may have more than one correct option, and a single wrong selection on a question marks the entire question wrong — no partial credit. The final test is scored out of 100% and contributes 50% to the overall mark.

Final Total
Component Out of Weight
Practical Assignments (rubric-scored) 100% 30%
Daily Average (multiple choice) 100% 20%
Final Test (multi-answer multiple choice) 100% 50%
Final Total 100%

All marks are recorded on the AATICD LMS and visible to each learner under their account.

Certificate

Certificate of Completion

Awarded to delegates who achieve an overall mark of 50% or higher on the Final Total (Practicals 30% + Daily Average 20% + Final Test 50%).

How it works
  • Certificates are auto-generated on the AATICD LMS as soon as the marks pass the 50% threshold.
  • Each certificate is a branded PDF with the delegate's name, the course title, the unit standard ID, NQF level, credits, and the date of issue.
  • You can download or print your certificate from your LMS dashboard at any time after issue — there's no reissue fee and no expiry date.
  • If you scored under 50% you can sit the final test again at the next scheduled session at no extra cost.
Where to find it

Sign in to the LMS, open your dashboard, and your certificates appear under My Certificates. Each entry has a View / Download button and a print option.

Training Discounts

Group discounts apply automatically — the more delegates you enrol, the greater the saving. Discounts are calculated at 3% per 5 delegates, scaling up to 40% off for 100+ delegates.

Delegates Discount
5 3% off
10 6% off
15 9% off
20 12% off
25 15% off
30 18% off
50 30% off
75 35% off
100 40% off

3% discount per 5 delegates, up to 40% off for 100+ delegates. Contact us for a custom group quote.

Upcoming Training Sessions
Online training — attend live sessions from anywhere via our virtual classroom.
Start End Delivery Season Price Action
Wed 09 Sep 2026 Mon 21 Sep 2026 Virtual Spring 2026 $1,798 Register
Tue 29 Sep 2026 Fri 09 Oct 2026 Virtual Spring 2026 $1,798 Register
Mon 19 Oct 2026 Thu 29 Oct 2026 Virtual Spring 2026 $1,798 Register
Wed 09 Dec 2026 Mon 21 Dec 2026 Virtual Summer 2026 $1,798 Register
Tue 12 Jan 2027 Fri 22 Jan 2027 Virtual Summer 2026 $1,798 Register
Mon 15 Feb 2027 Thu 25 Feb 2027 Virtual Summer 2026 $1,798 Register
Fri 05 Mar 2027 Wed 17 Mar 2027 Virtual Autumn 2027 $1,798 Register
Thu 11 Mar 2027 Tue 23 Mar 2027 Virtual Autumn 2027 $1,798 Register
Wed 17 Mar 2027 Mon 29 Mar 2027 Virtual Autumn 2027 $1,798 Register
Tue 08 Jun 2027 Fri 18 Jun 2027 Virtual Winter 2027 $1,798 Register
Mon 28 Jun 2027 Thu 08 Jul 2027 Virtual Winter 2027 $1,798 Register
Fri 23 Jul 2027 Wed 04 Aug 2027 Virtual Winter 2027 $1,798 Register
Thu 09 Sep 2027 Tue 21 Sep 2027 Virtual Spring 2027 $1,798 Register
Wed 29 Sep 2027 Mon 11 Oct 2027 Virtual Spring 2027 $1,798 Register
Tue 19 Oct 2027 Fri 29 Oct 2027 Virtual Spring 2027 $1,798 Register
Wed 08 Dec 2027 Mon 20 Dec 2027 Virtual Summer 2027 $1,798 Register
Tue 28 Dec 2027 Fri 07 Jan 2028 Virtual Summer 2027 $1,798 Register
Mon 17 Jan 2028 Thu 27 Jan 2028 Virtual Summer 2027 $1,798 Register
On-Campus training — face-to-face sessions at our training venues across Africa and beyond.
Showing all 498 sessions across 26 venues
Start End Venue Season Price Action
Mon 03 Aug 2026 Thu 13 Aug 2026 Johannesburg, South Africa Winter 2026 $3,969 Register
Tue 04 Aug 2026 Fri 14 Aug 2026 Mauritius Winter 2026 $5,211 Register
Wed 05 Aug 2026 Mon 17 Aug 2026 Cape Town, South Africa Winter 2026 $4,455 Register
Thu 06 Aug 2026 Tue 18 Aug 2026 Dubai, UAE Winter 2026 $6,615 Register
Fri 07 Aug 2026 Wed 19 Aug 2026 Pretoria, South Africa Winter 2026 $2,700 Register
In-House training — we bring the trainer to your organisation, tailored to your team.
Start End Delivery Season Price Action
Thu 17 Sep 2026 Tue 29 Sep 2026 Your Premises Spring 2026 $2,338 Register
Wed 07 Oct 2026 Mon 19 Oct 2026 Your Premises Spring 2026 $2,338 Register
Tue 27 Oct 2026 Fri 06 Nov 2026 Your Premises Spring 2026 $2,338 Register
Thu 17 Dec 2026 Tue 29 Dec 2026 Your Premises Summer 2026 $2,338 Register
Wed 20 Jan 2027 Mon 01 Feb 2027 Your Premises Summer 2026 $2,338 Register
Tue 23 Feb 2027 Fri 05 Mar 2027 Your Premises Summer 2026 $2,338 Register
Mon 08 Mar 2027 Thu 18 Mar 2027 Your Premises Autumn 2027 $2,338 Register
Fri 19 Mar 2027 Wed 31 Mar 2027 Your Premises Autumn 2027 $2,338 Register
Thu 25 Mar 2027 Tue 06 Apr 2027 Your Premises Autumn 2027 $2,338 Register
Wed 16 Jun 2027 Mon 28 Jun 2027 Your Premises Winter 2027 $2,338 Register
Tue 06 Jul 2027 Fri 16 Jul 2027 Your Premises Winter 2027 $2,338 Register
Mon 26 Jul 2027 Thu 05 Aug 2027 Your Premises Winter 2027 $2,338 Register
Fri 17 Sep 2027 Wed 29 Sep 2027 Your Premises Spring 2027 $2,338 Register
Thu 07 Oct 2027 Tue 19 Oct 2027 Your Premises Spring 2027 $2,338 Register
Wed 27 Oct 2027 Mon 08 Nov 2027 Your Premises Spring 2027 $2,338 Register
Thu 16 Dec 2027 Tue 28 Dec 2027 Your Premises Summer 2027 $2,338 Register
Wed 05 Jan 2028 Mon 17 Jan 2028 Your Premises Summer 2027 $2,338 Register
Tue 25 Jan 2028 Fri 04 Feb 2028 Your Premises Summer 2027 $2,338 Register
Training Discounts
Delegates Discount
5 3% off
10 6% off
15 9% off
20 12% off
25 15% off
30 18% off
50 30% off
75 35% off
100 40% off

3% off per 5 delegates, up to 40% for 100+

View Sessions & Register Get A Quote Download Course Brochure
Have an account?

Sign in to track your applications and manage your cart.

Related Courses

Other Physical Planning and Construction courses at NQF level 2 learners on this page also viewed.

Browse the full Physical Planning and Construction category for physical planning and construction training programmes.
GET A QUOTE / APPLY COURSE CATALOGUE